These new WiseBox multi-channel remote controls reduce the cost and greatly simplify the installation of power in the garden. This means that power to run garden lighting, pond equipment and even electric gates can be taken from anywhere in the house, garage or outbuildings, while cutting the labour and materials required to run switch wires back to different areas of the property. The WiseBox system also dispenses with the need to chase out internal walls and fit switches, as each garden circuit can be controlled from the convenient portable handsets or wireless wall switches.

WiseBox kits are the easy way to buy a remote control with everything you need for a typical system all in one pack. They come complete with a 4-channel receiver, 4-channel keyfob and 4-channel wireless interior wall switch. The WiseDim kits have a 7- rather than 4-channel wireless wall switch, and the PIR kits have the addition of an IP44 exterior rated PIR. The standard WiseBox receiver has four 10 amp channels, and is built for outdoor use with its tough IP54 enclosure.

The standard WiseBox receiver has four 10 amp channels which are all fused individually to protect the circuits. The WiseDim receiver has four 700w dimmable channels that can be easily changed to switching if the load cannot be dimmed. They are simple to install and easy to use, and come in a tough IP54 enclosure, making the units ideal for outdoor use. The single channel receiver (1000w) is designed for interior use and is small enough to be placed in a ceiling through a downlighter hole. Alternatively it can be fitted into a waterproof box for use outside.

These compact wireless switches can be programmed to any number of channels on any number of WiseBox receivers, making their use incredibly flexible. For example, one could be kept in the car to operate the electric gates and garage door, as well as switch on the lights in the front garden or the hall. Another could be kept in the bedroom so that garden or security lights can be switched on if noises are heard at night. For more extensive systems the WisePod has seven buttons and can control up to 42 channels. The centre button changes the LED from 1 to 6, with each light representing another seven buttons.

These innovative wireless switches can be easily programmed to any of the channels on the WiseBox or WiseDim receivers in a wide variety of combinations, and can be used to switch more than one WiseBox. In addition to the standard switching, the 7-channel switch has three additional functions. Button five will turn on all channels at previous levels; button six will turn on channels 1 and 2 only; button 7 will turn off any channels that are on. Wise switches are very quick and easy to fit and do not require any back boxes or electrical wiring. They have a battery life of up to two years and are available in either white or silver as standard but also come in a wide range of different finishes to match existing interiors. Please ask for more details.

This easy to fit remote PIR can be installed anywhere without having to be hard-wired, and can be mounted on a ceiling or wall, inside or out. It has PIR zone adjustment from one to twelve metres, time adjustment from five seconds to five minutes, and lux level adjustment to set the day/night operation.